Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Porsche 930 Conversion Kit for Type 2 VW Bus 091 Transmission To 930 Cv Joints

Porsche 930 Conversion Kit for Type 2 VW Bus 091 Transmission To 930 Cv Joints
    Quantity in Basket: None
    Part Number: ac598231
    Price: $1,085.00
    Sold As: Complete Conversion Kit

     
    What Length Axles Do You Require? Price may vary by axle.:
    15 5/8 Inches
    16 3/4 Inches
    17 1/2 Inches +$10.25
    18 3/4 Inches
    19 1/4 Inches
    20 1/4 Inches
    22 Inches +$15.50
    23 Inches +$20.50
    24 Inches +$21.25
    25 Inches +$31.50
    26 Inches +$31.50
    27 Inches +$31.50
    28 Inches +$31.50
       
    Quantity:
     
    Kit Includes:
    2 - Type 1 to 930 Chromoly Stub Axles
    2 - Type 2 091 to 930 Chromoly Drive Flanges
    2 - Porsche 930 Chromoly Axles(Choose Your Length. Price varies by axle length
    4 - Porsche 930 Race Prepd CV Joints With Chromoly Cage
    4 - CV Joints Flanges
    4 - CV Joint Boots
    24 - CV Joint Bolts
    2 - Swepco 101 Bottles
    1 - Bearings And Seals Kit

    How To Measure An IRS Axle Length
    How to Measure IRS Axle Length:

    1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

    2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

    3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

    4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

    5.) Measure both sides of the car. It is VERY common to have unequal length axles.



    Related Parts
    Part Number Name Image Price  
    ac525126 40 Spline Adapter Chromoly Drive Flange For Type-2 Bus 091 Or 094 Transmission To A Porsche 930 Cv 40 Spline Adapter Chromoly Drive Flange For Type-2 Bus 091 Or 094 Transmission To A Porsche 930 Cv
    $49.95
    ac520101 Mild Steel Irs Axle Spacer Kit 6 Spacers Total For Both Sides Of The Car Mild Steel Irs Axle Spacer Kit 6 Spacers Total For Both Sides Of The Car
    $38.20
    501299113 Rear Inner Irs Bearing Housing Snap Ring For 1969 To 1979 Beetle And Will Also Fit Aftermarket Arms Rear Inner Irs Bearing Housing Snap Ring For 1969 To 1979 Beetle And Will Also Fit Aftermarket Arms
    $6.90
    ac525111 Chromoly Adapter Stub Axle With Type-1 Beetle Shaft To Porsche 930 Cv Joint Chromoly Adapter Stub Axle With Type-1 Beetle Shaft To Porsche 930 Cv Joint
    $99.95
    swepco101 SWEPCO 101 #2 Moly High Temperature Cv Joint Grease 14.40 Oz Tube 1 Tube Typically Does 2 Cv Joints SWEPCO 101 #2 Moly High Temperature Cv Joint Grease 14.40 Oz Tube 1 Tube Typically Does 2 Cv Joints
    $19.10
    ac000135-930 3/8 Drive Socket For 12 Point 930 CV Joint Bolts - Works With AC501935-930 3/8 Drive Socket For 12 Point 930 CV Joint Bolts - Works With AC501935-930
    $18.00
    ac501935-930 3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joints 3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joints
    $2.90
    ac525209-930 Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4 Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4
    $9.60
    ac530014e Class 5/1600 Or 12/1600 Irs Rear Mild Steel Boxed In Stock Width 1 Inch Longer Trailing Arms 1 Pair Class 5/1600 Or 12/1600 Irs Rear Mild Steel Boxed In Stock Width 1 Inch Longer Trailing Arms 1 Pair
    $325.40
    ac530015e Irs 3x3 Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms With Beetle Bearing Housing Irs 3x3 Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms With Beetle Bearing Housing
    $409.00



    Customers who purchased this product, also purchased:
    Part Number Name Image Price 
    porsche930cv-empi-2 Empi 87-9470-B Stage 2 Porsche 930 Or 911 Turbo Cv Joint Race Prepped With Chromoly Cage Empi 87-9470-B Stage 2 Porsche 930  Or 911 Turbo Cv Joint Race Prepped With Chromoly Cage $79.95



    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    VW IRS 3x3 Aircraft 4130 Chromoly Mig Welded Boxed Micro Stub Trailing Arms, Made In USA
    VW IRS 3x3 Aircraft 4130 Chromoly Mig Welded Boxed Micro Stub Trailing Arms, Made In USA
    Price: $725.00
    SMF Small 12 Inch X 20 Inch Replacement Flag for Whip Antenna Thin Red and Blue Line Fire Fighter an
    SMF Small 12 Inch X 20 Inch Replacement Flag for Whip Antenna Thin Red and Blue Line Fire Fighter an
    Price: $7.95
    Pacific Customs VW 6 Inch Wider Beam Suspension Kit With 2.25 Inch Arms
    Pacific Customs VW 6 Inch Wider Beam Suspension Kit With 2.25 Inch Arms
    Price: $1,391.00
    VW Stock Height Heavy Duty Combo Spindle Kit for International Tie Rod Ends
    VW Stock Height Heavy Duty Combo Spindle Kit for International Tie Rod Ends
    Price: $575.00
    Multi-currencies display