|
|
|
|
|
Micro Stub Trailing Arm Kit With 3X3 Arms, Jamar Disc Brakes and Four Piston Calipers, & Delrin Bush
|
|
Quantity in Basket:
None
Part Number: ac598995
Sold As:
1 Kit
|
|
| |
Kit Includes:
2 - VW IRS 3x3 Aircraft 4130 Chromoly Mig Welded Boxed Micro Stub Trailing Arms, Made In USA
4 - "Shark Fin" Shock Tabs
2 - Urethane Bushings
2 - Jamar 4 Piston Calipers
2 - Jamar Micro Stub 4130 Axles for Porsche 930 CV Joints
2 - Rotors
2 - Bearing Assemblies
2 - Axle Nuts
12 - CV Joint Bolts
The key benefit of a micro stub assembly is the stub axle is shorter providing greater strength and also the CV joint will be further away from the transmission, allowing you to use a longer axle with less CV angle to get more wheel travel.
To measure the appropriate axle for your vehicle, install the arms complete with the brakes on the vehicle. Once installed, jack the trailing arm up so that the CV joint on the arm would be straight across from the CV joint on the transmission so the axle would be at zero degrees. This is important because you need your shortest length to purchase an axle otherwise when the arm travels upward it would force the axle into the transmission. After you have jacked the arm up to zero degrees, measure from the center portion of the stub axle to the center point on your drive flange on the side of the transmission. Do not measure from where the CV joint bolts on. You measure from center of cup to center of cup to get the "plunge" distance. Once you have that length, you typically subtract 3/8" to 1/4" for your axle length. Be sure to measure both sides of the vehicle, because most transmissions are not centered in the vehicle, and you may need to purchase two different lengths of axle. If you have any further questions about this you can call us at 951-738-8380.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac598555 |
Jamar Performance J9030-4340 Pro-X Rear Micro Stub Disc Brake Kit For Porsche 930 Cv Joints |
|
$2,649.50 |
|
ac530050-ms33 |
VW IRS 3x3 Aircraft 4130 Chromoly Tig Welded Boxed Micro Stub Trailing Arms, Made In USA |
|
$1,645.00 |
|
ac530050-ms33-mig |
VW IRS 3x3 Aircraft 4130 Chromoly Mig Welded Boxed Micro Stub Trailing Arms, Made In USA |
|
$1,095.00 |
|
ac598533 |
Vw Rear Suspension Kit 3x3 Micro Stub Arms And Jamar Brakes for Sand Rails, Baja Bugs |
|
$4,899.00 |
|
ac530016 |
Irs Rear 3x3 Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes |
|
$399.25 |
|
ac501935-930 |
3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joints |
|
$2.90 |
|
ac501935-930d |
3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joint Drilled For Safety Wire |
|
$2.75 |
|
porsche930cv-german |
Lobro Gkn German Made Stock Porsche 930 Or 911 Turbo Cv Joint |
|
$119.95 |
|
porsche930cv-empi-1 |
Empi Stage 1 Porsche 930 Or 911 Turbo Cv Joint With Chromoly Cage |
|
$82.95 |
|
porsche930cv-proam-lp |
Pro-Am Porsche 930 Or 911 Turbo Cv Joint Race Prepped And Lightened For Class 1600 With 300M Cage |
|
$299.90 |
|
porsche930cv-empi-2 |
Empi 87-9470-B Stage 2 Porsche 930 Or 911 Turbo Cv Joint Race Prepped With Chromoly Cage |
|
$92.95 |
|
porsche930cv-empi-3 |
Empi Stage 3 Porsche 930 Or 911 Turbo Cv Joint Race Prepped, Lightened, Chromoly Cage Class 1600 |
|
$199.95 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac000155
|
Usa Made Irs Pivot Mount Installation Jigs Aids In Proper Positioning Of Irs Pivot Mounts No Refunds
|
|
$115.30 |
|
ac405350
|
Usa Made Tig Welded Heavy Duty A-Arm Spindles With Combo Link Spindle Shafts Click For Dimensions
|
|
$489.65 |
|
ac501362
|
Usa Made Tig Welded Irs Spring Plate Kit Racing Reinforcement Cover Plates
|
|
$159.95 |
|
141031311bhd
|
200Mm 8 Inch Diameter Exedy Daikin Heavy Duty Racing Metal Woven Clutch Disc For 1967 To 1979 Beetle
|
|
$109.75 |
|
saco60-2021
|
Saco Billet Aluminum Ball Joint Frame To King And Link Pin Axle Beam Adapters
|
|
$369.00 |
|
ac530005
|
Chromoly HD IRS Trailing Arm Pivot Brackets For Stock Torsion Housing Using Frame Horns Requires Jig
|
|
$149.95 |
|
JAMAR-BP5000TX-34
|
Jamar BP5000TX Dune Buggy Pedal Assembly 3/4" Or 7/8" Brake W/ Roller Gas Pedal & Slave Cylinder
|
|
$429.50 |
|
ac498900
|
VW Long Travel Sand Rail / Baja Bug Front Coil Suspension Kit 12 Inches Travel
|
|
$4,945.00 |
|
| |
|
Your shopping cart is empty.
|
|
