|
|
|
|
|
Usa Made Swaged Aluminum Tie Rod 22 Inches Long With 3/4-16 Thread
|
|
Quantity in Basket:
None
Part Number: ac425125-22a
Sold As:
1 Swaged Aluminum Tie Rod
|
|
| |
This tie rod has left hand thread on one side and right hand thread on the other side allowing you to expand or contract the length. This tie rod is commonly used for rod ends or heim joints to create all sorts of linkage. On Hot Rods, Street Rods, sand rails, dune buggies, trucks, jeeps, or rock crawlers they are commonly used for making sway bar links, tie rods, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, or traction bars.
Our USA made swaged tie rods are super strong. Swaging is a forging process in which the ends of the tie rods are compressed using dies which the tie rods are forced in to. Compressing the ends of the tie rods increases the density of the material.
We offer these swaged tie rods in both aluminum and steel. The advantage of using aluminum on your front end, is that if you hit something with your vehicle the aluminum tie rod will bend before your arms, spindles, or other expensive front end components. The aluminum tie rod would be your "weak point" and tie rods are much cheaper than replacing arms, spindles, or other front end components.
For the hardcore racer or heavy duty sand rail, baja bug, or rock crawler we offer the swaged steel tie rods that are less forgiving in an accident.
If you have a King Pin and Link Pin front axle beam using an off road rack and pinion for heim joints, the rack and pinion will use FKHRSMXL10T heim joints with the built in misalignment shoulder. If you have combo link spindles that use 5/8 bolts for the heim joints you use FKJMX12T heims with 5/8 inch misalignment shims to get enough angle when the arm fully drops down. If you have stock King Pin and Link Pin spindles that use stock tie rod ends you can drill the tie rod hole out to 1/2 inch and use FKJMX12T heims with 1/2 inch misalignment shims to get enough angle when the arm fully drops down.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac425125-22s |
Usa Made Swaged Steel Tie Rod 22 Inches Long With 3/4-16 Thread |
|
$44.90 |
|
fkrodendhrsmxl10t |
Fk Rod Ends 3/4 Left Hand Thread Chromoly Rod End 5/8 Inch Hole Built In Misalignment Shoulder |
|
$77.99 |
|
fkrodendjmx12t |
Fk Rod Ends Usa Made 3/4 Teflon Coated Right Hand Thread Chromoly Rod End Heim Joint With 3/4 Hole |
|
$58.45 |
|
ma341212 |
Usa Stainless Steel Misalignment Shim For 3/4 Inch Heim Or Uniball For 1/2 Inch Bolt 1/2 Inch Height |
|
$13.15 |
|
ma345812 |
Misalignment Shim For 3/4 Inch Heim Or Uniball For 5/8 Inch Bolt 1/2 Inch Height |
|
$13.15 |
|
fasn34-16jlh |
3/4-16 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends |
|
$2.65 |
|
fasn34-16jrh |
3/4-16 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends |
|
$0.80 |
|
ac425121il |
Replacement International Tie Rod End Left Hand 3/4-16 Thread For Off Road Rack And Pinions |
|
$24.95 |
|
ac425121ir |
Replacement International Tie Rod End Right Hand 3/4-16 Thread For Off Road Rack And Pinions |
|
$24.95 |
|
ac425125-23a |
Usa Made Swaged Aluminum Tie Rod 23 Inches Long With 3/4-16 Thread For 6 Inch Beam With 2 1/4 Arms |
|
$40.75 |
|
ac425125-23s |
Usa Made Swaged Steel Tie Rod 23 Inches Long With 3/4-16 Thread For 6 Inch Beam With 2 1/4 Arms |
|
$44.90 |
|
ac425125-24a |
Usa Made Swaged Aluminum Tie Rod 24 Inches Long With 3/4-16 Thread For 6 Inch Beam With 4 Inch Arms |
|
$40.75 |
|
ac425125-24s |
Usa Made Swaged Steel Tie Rod 24 Inches Long With 3/4-16 Thread For 6 Inch Beam With 4 Inch Arms |
|
$44.90 |
|
ac425125-25a |
Usa Made Swaged Aluminum Tie Rod 25 Inches Long With 3/4-16 Thread For 8 Inch Beam With 4 Inch Arms |
|
$45.30 |
|
ac425125-25s |
Usa Made Swaged Steel Tie Rod 25 Inches Long With 3/4-16 Thread For 8 Inch Beam With 4 Inch Arms |
|
$47.30 |
|
ac425125-26a |
Usa Made Swaged Aluminum Tie Rod 26 Inches Long 3/4-16 Thread For For 10 Inch Beam With 4 Inch Arms |
|
$45.30 |
|
ac425125-26s |
Usa Made Swaged Steel Tie Rod 26 Inches Long 3/4-16 Thread For 10 Inch Beam With 4 Inch Arms |
|
$47.30 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac425121il
|
Replacement International Tie Rod End Left Hand 3/4-16 Thread For Off Road Rack And Pinions
|
|
$24.95 |
|
ac425121ir
|
Replacement International Tie Rod End Right Hand 3/4-16 Thread For Off Road Rack And Pinions
|
|
$24.95 |
|
ac401034-500w
|
Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm
|
|
$3.45 |
|
ac425036b
|
Weld-On Steering Shaft Bracket With Needle Bearings For 3/4 Steering Shaft To 1.50 Tube
|
|
$42.40 |
|
ac413108dt
|
Delpolythane Bushings For King And Link Pin Axle Beams That Have A 1.740 Inch Id
|
|
$49.80 |
|
ac405030hkit
|
VW Stock Height Heavy Duty Combo Spindle Kit For 5/8 Heim Joint - 5/8 Link Pins
|
|
$665.00 |
|
ac405015cm
|
Clamp Style Chromoly Spindle Nuts For King And Link Pin, Combo Link, Or King Kong Spindles
|
|
$32.95 |
|
sw401-50635
|
Usa Made Sweet Manufacturing Universal Joint 3/4 Inch Smooth To 15mm For Transmission Shift Linkage
|
|
$74.90 |
|
| |
|
Your shopping cart is empty.
|
|
