|
|
|
|
|
5/8 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds
|
|
Quantity in Basket:
None
Part Number: ac401035-625
Sold As:
1 Chromoly Thru Rod, 2 Teflon Washers, 2 Flat Washers, 1 Nyloc Nut, 1 Pinch Nut, 1 Welded Nut
|
|
| |
The price of this thru rod is for one tube. If you are doing both tubes of your axle beam you need to purchase two of these thru rods. Our thru rods are made in house out of American Made Chromoly Material. They are race quality and the best on the market.
One end of the thru rod has the nut welded on to prevent it from loosening. We require the dimension of your axle beam from outside edge of arm to outside edge of arm. We will make the compensation ourselves for the threaded portion for the nuts.
A thru rod is required on a Volkswagen Ball Joint or King and Link Pin front axle beam when you remove the front torsion bars. Thru rods hold your arms inside of the beam and allow the front trailing arms to move independently from the driver side to the passenger side. Once you remove your torsion plates, a coil over shock, air shock, or air bag is required to support the weight of the vehicle.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac401035-500 |
1/2 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds |
|
$154.50 |
|
ac401033-625n |
Replacement 5/8-18 Thread Pinch Nut For Thru Rods |
|
$16.15 |
|
ac401034-625w |
Thru Rod Bronze Washer With 5/8 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm |
|
$3.45 |
|
fasn58-18n |
Grade 8 Fine Thread 5/8-18 Nylock Hex Nut Zinc Plated Gold Color |
|
$0.80 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac405698
|
Combo Link Bearing Kit With Seal For One Wheel
|
|
$49.80 |
|
ac401051nt-10
|
Usa Made 10 Inch Wider 4130 Chromoly King And Link Pin Axle Beam Without Towers For Coil Over Shocks
|
|
$412.35 |
|
fasn58-18n
|
Grade 8 Fine Thread 5/8-18 Nylock Hex Nut Zinc Plated Gold Color
|
|
$0.80 |
|
f911bolt58-18x400
|
Super Heavy Duty F911 5/8-18 Fine Thread Grade 9 Hex Bolt 4 Inches Long For Heims Combo Link Spindle
|
|
$7.40 |
|
ac405016
|
Usa Made Clamp Style Chromoly Spindle Nut Kit For King And Link Pin, Combo Link, King Kong Spindles
|
|
$124.99 |
|
ac425125-24s
|
Usa Made Swaged Steel Tie Rod 24 Inches Long With 3/4-16 Thread For 6 Inch Beam With 4 Inch Arms
|
|
$44.90 |
|
ac405031h
|
Combo Link Heavy Duty Spindles For 5/8 Heim Joints - 3 Raised
|
|
$596.80 |
|
whl009
|
14mm-1.5 Long Acorn Lug Nut With 60 Degree Taper For Steel Baja, Stock Vw, Cms, Douglas, Or Latest
|
|
$2.10 |
|
| |
|
Your shopping cart is empty.
|
|
