|
|
|
VW IRS Short Torsion Bar Kit For Tire Clearance
|
|
Quantity in Basket:
None
Part Number: ac598300
Sold As:
1 Short Torsion Bar Kit
|
|
|
Kit Comes With The Following:
Rear Type 1 Beetle Torsion Bars 26Mm Diameter 21 3/4 Inches Long 1 Pair (Upgrade to 27mm or 28mm)
Painted Irs Spring Plates For 21 3/4 Inch Long Torsion Bars - 1 Pair
Chrome Torsion Covers Without Hole For 21 3/4 Torsion Bars On Irs Or Swing Axle - 1 Pair
Saco Usa Made Injection Molded Delrin Knobby 1-3/4 Inside Diameter Spring Plate Grommets
Saco Usa Made Injection Molded Delrin Knobby 1-7/8 Inside Diameter Spring Plate Grommets
Torsion Tool To Remove Or Install Spring Plates Or Torsion Bars
Install a short torsion bar in your Manx or Baja Bug for offroad tire clearance. The stock torsion bar sticks out and can interfere with larger tires. Please see individual parts of the kit below.
Rear Type 1 VW Suspension Setups: Swing Axle And Irs, Rear Independent Suspension The most obvious difference between the two is camber effect is more severe on a swing axle versus an IRS. Torsion Bar Lengths: 21 3/4 (Torsion Bar Does Not Stick Out) 24 11/16 ( Torsion Bar Sticks Out 3 Inches) 26 9/16 ( Torsion Bar Sticks Out 5.5 Inches) Choosing Torsion Length: 1969 And Newer is IRS and used 26 9/16 Torsion Bars Type 1 up to 1958 is Swing Axle and used 24 11/16 Torsion Bars 1958 - 1968 bugs were all Swing Axle and used 21 3/4 Torsion Bars VW Thing were all IRS and used 24 11/16 Torsion Bars
|
Related Parts
Part Number |
Name |
Image |
Price |
|
ac501300-26 |
Rear Type 1 Beetle Torsion Bars 26Mm Diameter 21 3/4 Inches Long 1 Pair |
|
$229.95 |
ac501300-27 |
Rear Type 1 Beetle Torsion Bars 27Mm Diameter 21 3/4 Inches Long 1 Pair |
|
$229.95 |
ac501300-28 |
Rear Type 1 Beetle Torsion Bars 28Mm Diameter 21 3/4 Inches Long 1 Pair |
|
$229.95 |
ac501315 |
Painted Irs Spring Plates For 21 3/4 Inch Long Torsion Bars - 1 Pair |
|
$99.95 |
ac511101 |
Chrome Torsion Covers Without Hole For 21 3/4 Torsion Bars On Irs Or Swing Axle - 1 Pair |
|
$22.10 |
saco94-3001 |
Saco Usa Made Knobby 1-3/4 Inside Diameter Spring Plate Grommets |
|
$39.90 |
saco94-3011 |
Saco Usa Made Knobby 1-7/8 Inside Diameter Spring Plate Grommets |
|
$39.90 |
ac000116 |
Torsion Tool To Remove Or Install Spring Plates Or Torsion Bars |
|
$44.95 |
Customers who purchased this product, also purchased:
Part Number
|
Name
|
Image
|
Price |
|
saco94-3022
|
Saco Usa Made Irs Trailing Arm Pivot Bushing Set
|
|
$64.00 |
ac501140
|
Type 1 Beetle Oem Irs Rear Trailing Arm Pivot Bolt Requires 2 Washers Per Bolt For Alignment
|
|
$11.15 |
ac501140w
|
Type 1 Beetle Oem Irs Rear Trailing Arm Pivot Bolt Washer 4 Are Required Per Car
|
|
$4.00 |
ac598990b
|
Bearing And Seal Kit For Both Rear Irs Trailing Arms
|
|
$109.98 |
ac598401
|
Vw Rear IRS Suspension Kit 3X3 Trailing Arms, 002 Bus Trans / 930 CV's
|
|
$1,995.00 |
ac598990c
|
Complete Bearing, Seal, Spacer, Cap, And Snap Ring Kit For Both Rear Irs Trailing Arms
|
|
$219.90 |
ac598155
|
Swing Axle Conversion Jig With Chromoly HD IRS Trailing Arm Pivot Brackets For Stock Torsion Housing
|
|
$259.95 |
ac413111
|
Urethane Front Trailing Arm Torsion Seals For Upper And Lower Arms 1966 To 1977 Ball Joint Front End
|
|
$24.10 |
|
|
|
Your shopping cart is empty.
|
|