Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Chromoly Axles For Porsche 930 Or 911 Turbo Cv Joints 27 Long - 1 Pair

Chromoly Axles For Porsche 930 Or 911 Turbo Cv Joints 27 Long - 1 Pair
    Quantity in Basket: None
    Part Number: ac525227
    Price: $299.90
    Sold As: Pair

     
    Quantity:
     
    How To Measure An IRS Axle Length
    How to Measure IRS Axle Length:

    1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

    2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

    3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

    4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

    5.) Measure both sides of the car. It is VERY common to have unequal length axles.



    Related Parts
    Part Number Name Image Price  
    ac525209-930 Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4 Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4
    $9.60



    Customers who purchased this product, also purchased:
    Part Number Name Image Price 
    ac525209-930 Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4 Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4 $9.60
    kennedydisc228-h-6p Kennedy 6 Puck Clutch Single Disc 228mm 9 Inch Diameter Mendeola Or Porsche G-50 1 Inch 23 Spline Kennedy 6 Puck Clutch Single Disc 228mm 9 Inch Diameter Mendeola Or Porsche G-50 1 Inch 23 Spline $114.50
    kep-fwhonda-9 Kennedy Adapter Flywheel For 1998-On Acura Or Honda 3.0-3.6 Liter 60 Degree V6 Using A 9 Inch Clutch Kennedy Adapter Flywheel For 1998-On Acura Or Honda 3.0-3.6 Liter 60 Degree V6 Using A 9 Inch Clutch $393.45
    ac510050cw Usa Made Tig Welded Chromoly Weld On Mount For Limiting Strap Clevises To The Side Of A 1.50 Tube Usa Made Tig Welded Chromoly Weld On Mount For Limiting Strap Clevises To The Side Of A 1.50 Tube $12.15
    umpfilter10905 Ump 4 Inch Super Air Filter With 8 Inch Canister For Engines That Have 150Hp To 250Hp Ump 4 Inch Super Air Filter With 8 Inch Canister For Engines That Have 150Hp To 250Hp $340.25
    porsche930cv-empi-1-4 Empi Stage 1 Porsche 930 Or 911 Turbo Cv Joints With Chromoly Cage Empi Stage 1 Porsche 930  Or 911 Turbo Cv Joints With Chromoly Cage $315.20
    ac405329kp Replacement T.I. Designs Combo Link Spindle King Pin Needle Bearings Replacement T.I. Designs Combo Link Spindle King Pin Needle Bearings $98.60
    ac405329upper Replacement T.I. Designs Combo Link Spindle King Pin Upper Snap Rings Replacement T.I. Designs Combo Link Spindle King Pin Upper Snap Rings $10.60



    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    Weld On Caliper Bracket For 4 Piston Calipers To Boxed Rear Trailing Arms
    Weld On Caliper Bracket For 4 Piston Calipers To Boxed Rear Trailing Arms
    Price: $40.00
    Pacific Customs VW 6 Inch Wider Beam Suspension Kit With 4 Inch Arms
    Pacific Customs VW 6 Inch Wider Beam Suspension Kit With 4 Inch Arms
    Price: $2,091.00
    Inline Temperature Thermostat Switch AN #8 Male/Female, 180 Degrees On
    Inline Temperature Thermostat Switch AN #8 Male/Female, 180 Degrees On
    Price: $42.00
    Heavy Duty 3X3 Heim Spring Plate Conversion Kit fits Custom Torsion Housing For Coil Suspension
    Heavy Duty 3X3 Heim Spring Plate Conversion Kit fits Custom Torsion Housing For Coil Suspension
    Price: $575.00
    Multi-currencies display