Chromoly Axles For Porsche 930 Or 911 Turbo Cv Joints 25 Long - 1 Pair

Quantity in Basket: None
Part Number: ac525225

Price: $329.90

Sold As: Pair
Mfg UPC: EMPI 16-2221-0

Quantity:

How to Measure IRS Axle Length:

1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

5.) Measure both sides of the car. It is VERY common to have unequal length axles.

California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov The above image is a representation of this item. Actual item may vary.

Related Parts

Part Number	Name	Image	Price
ac525209-930	Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4		$13.00

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac525209-930	Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4		$13.00
an-ha18-3-90	An 1/8 Npt Male To #3 Male 90 Degree Hose Adapter Typically Used For Brakes Anodized Black		$12.25
an-line48-3	An #3 Female To #3 Female 48 Inch Long Steel Braided Brake Hose With Chrome Ends		$32.80
HEADER-HONDA-MUFFLER	Header with Muffler Compatible with Honda 3.0, 3.2, and 3.5 Liter Offroad Applications, Made in USA		$778.50
ac750722-125	Weld On Double Sheared Shock Mount For King 2.0 Or Fox 2.0 Shock Absorbers 1.25 Inches Wide		$14.00
ac996000	Universal Weld On Battery Box 11.75 Inches Wide 7.25 Inches Deep		$49.05
an-bolt38f	An Bolt For Banjo Fittings 3/8 X 24 Standard Thread		$4.00
ac750724	Weld On Mounting Trick Tab With 1/4 Id Hole For The Side Of A Tube		$1.50