Check Out Our Ebay Store! Check Out Our Amazon.com Store! Like us on Facebook.com



Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Chromoly Axles For Type-1 Beetle Or Type-2 Bus Cv Joints - 20 1/4 Long For Bug Trans Using 3X3 Arms

Chromoly Axles For Type-1 Beetle Or Type-2 Bus Cv Joints - 20 1/4 Long For Bug Trans Using 3X3 Arms
    Country Of Origin: Taiwan
    Quantity in Basket: None
    Part Number: ac525204
    Price: $274.90
    Sold As: Pair


     
    Quantity:
     
    How To Measure An IRS Axle Length
    How to Measure IRS Axle Length:

    1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

    2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

    3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

    4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

    5.) Measure both sides of the car. It is VERY common to have unequal length axles.



    Related Parts
    Part Number Name Image Price  
    517279113 Snap Ring For Type 1 Beetle Drive Flange Or Type 1 Beetle And Type 2 Bus Axle Shaft Snap Ring For Type 1 Beetle Drive Flange Or Type 1 Beetle And Type 2 Bus Axle Shaft
    $2.40



    Customers who purchased this product, also purchased:
    Part Number Name Image Price 
    517279113 Snap Ring For Type 1 Beetle Drive Flange Or Type 1 Beetle And Type 2 Bus Axle Shaft Snap Ring For Type 1 Beetle Drive Flange Or Type 1 Beetle And Type 2 Bus Axle Shaft $2.40
    ac530015e Irs 3x3 Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms With Beetle Bearing Housing Irs 3x3 Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms With Beetle Bearing Housing $469.00
    501229113dhd Irs Cv Joint Bolt For Beetle Or Bus Heavy Duty 3/8-24 Diameter - Will Not Work On Stock Applications Irs Cv Joint Bolt For Beetle Or Bus Heavy Duty 3/8-24 Diameter - Will Not Work On Stock Applications $2.90
    whl008 14Mm-1.5 Lug Nut Stud For Stock 4 Lug Type 1 Beetle Brake Drums - Use 1/2-20 Lug Nuts 14Mm-1.5 Lug Nut Stud For Stock 4 Lug Type 1 Beetle Brake Drums - Use 1/2-20 Lug Nuts $1.05
    ac755160-1 Buggy Whip Quick Disconnect Standard 1/2-20 Thread Buggy Whip Quick Disconnect Standard 1/2-20 Thread $19.95
    ac750724 Weld On Mounting Trick Tab With 1/4 Id Hole For The Side Of A Tube Weld On Mounting Trick Tab With 1/4 Id Hole For The Side Of A Tube $1.25
    ac598990b Bearing And Seal Kit For Both Rear Irs Trailing Arms Bearing And Seal Kit For Both Rear Irs Trailing Arms $104.98
    ac598990c Complete Bearing, Seal, Spacer, Cap, And Snap Ring Kit For Both Rear Irs Trailing Arms Complete Bearing, Seal, Spacer, Cap, And Snap Ring Kit For Both Rear Irs Trailing Arms $209.90



    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    Stock Width VW Front Adjustable Axle Beam Kit With 8 Inch Shock Towers, With Rack Mount Welded On
    Stock Width VW Front Adjustable Axle Beam Kit With 8 Inch Shock Towers, With Rack Mount Welded On
    Price: $459.00
    Weld On Caliper Bracket For 4 Piston Calipers To Boxed Rear Trailing Arms
    Weld On Caliper Bracket For 4 Piston Calipers To Boxed Rear Trailing Arms
    Price: $40.00
    Header with Muffler Compatible with Honda 3.0, 3.2, and 3.5 Liter Offroad Applications, Made in USA
    Header with Muffler Compatible with Honda 3.0, 3.2, and 3.5 Liter Offroad Applications, Made in USA
    Price: $717.50
    King Shocks Black Anodized Engraved With Size Spanner Nut Wrench For King 2.5 Shocks
    King Shocks Black Anodized Engraved With Size Spanner Nut Wrench For King 2.5 Shocks
    Price: $48.35
    Multi-currencies display