1/2 Inch Replacement Thru Rod Only For 8 Inch Wider Axle Beams

Quantity in Basket: None
Part Number: ac401032-01

Price: $33.74

Sold As: 1 Thru Rod Without Nuts Or Washers

Quantity:

Rod is 48 5/8 Inches long

For best results use a teflon washer against the arm, then the clamp nut, then a nylock nut. Especially use a nylock jam nut on the driver side because even with a pinch nut, with the arm moving up and down the driver side nuts tend to loosen up. A thru rod is required on a Volkswagen Ball Joint or King and Link Pin front axle beam when you remove the front torsion bars. Thru rods hold your arms inside of the beam and allow the front trailing arms to move independently from the driver side to the passenger side. Once you remove your torsion plates, a coil over shock, air shock, or air bag is required to support the weight of the vehicle.

A 8 inch wider beam is 42 inches wide not including the trailing arms.

Related Parts

Part Number	Name	Image	Price
fasn12-20n	Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color		$0.80
ac401035-500	1/2 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds		$139.50
ac401035-625	5/8 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds		$154.50
ac401033-500n	Replacement 1/2-20 Thread Pinch Nut For Thru Rods		$9.00
ac401034-500w	Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm		$3.45
ac401030	1/2 Inch Thru Rod Kit With Nuts For Stock Width Front Axle Beam Does Not Include Teflon Washers		$70.75
ac401030-01	1/2 Inch Replacement Thru Rod Only For Stock Width Axle Beams		$29.20
ac401031	1/2 Inch Thru Rod Kit With Nuts For 5 Inch Or 6 Inch Wider Axle Beam Does Not Include Teflon Washers		$75.25
ac401031-01	1/2 Inch Replacement Thru Rod Only For 5 Inch Or 6 Inch Wider Axle Beams		$29.20
ac401032	1/2 Inch Thru Rod Kit With Nuts For 8 Inch Wider Axle Beam Does Not Include Teflon Washers		$82.40

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac401033-500n	Replacement 1/2-20 Thread Pinch Nut For Thru Rods		$9.00
ac401034-500w	Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm		$3.45
fasn12-20n	Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color		$0.80

Your shopping cart is empty.

New Products

VW Baja Bug Offroad Side Mirror Mounting Brackets, For Use With ac857820 And ac857821
Price: $109.50

Floor Mounted Pedal Assembly With 3/4 Master Cylinder
Price: $149.98

Vw Rear IRS Suspension Kit 3X3 Trailing Arms, 091 Bus Trans / 930 CV's
Price: $1,797.00

Heavy Duty Irs Trailing Arm Pivot Brackets With Grade 9 F-911 Bolts And Tig Welded Bolt Stops
Price: $109.95