Dimple Die For 1.00 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press

Quantity in Basket: None
Part Number: ac000200-100

Price: $30.00

Sold As: 1 Dimple Die

Quantity:

Video demonstration from Full Droop TV on how to use dimple dies. (5 minutes 50 seconds in)

Dimpling sheet metal in any race vehicle gives it more strength and removes weight. These dimple dies are made from 8620 bearing steel so they will not wear out. Rockwell hardness of 80.

California Prop 65 Warning: This item may cause cancer or reproductive harm. For more info visit p65warnings.ca.gov The above image is a representation of this item. Actual item may vary.

Related Parts

Part Number	Name	Image	Price
ac000420	Adjustable Deburring Tool For Removing Rough Edges From Tubes, Tabs, Or Any Other Fabrication		$24.10
ac000200-050	Dimple Die For 0.50 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$24.00
ac000200-075	Dimple Die For 0.75 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$24.00
ac000200-125	Dimple Die For 1.25 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$42.00
ac000200-150	Dimple Die For 1.50 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$52.00
ac000200-175	Dimple Die For 1.75 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$65.00
ac000200-200	Dimple Die For 2.00 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$75.00
ac000200-250	Dimple Die For 2.50 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$85.00
ac000200-300	Dimple Die For 3.00 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$140.00
ac000200-d	Quarter Turn Fastener Dimple Die Tool Will Fit Southco Dzus Buttons Or Dfci Quarter Turn Fasteners		$16.50
ac000200s	Complete Dimple Die Set Includes 0.50 - 0.75 - 1.00 - 1.25 - 1.50 - 1.75 - 2.00 -2.50 - 3.0 And Zeus		$399.00
ac000200s-1	Small Dimple Die Set Includes: 0.50 - 0.75 And 1.00 Will Do Up To 3/16 Plate Using A 20 Ton Press		$72.00
ac000200s-2	Medium Dimple Die Set Includes: 1.25 - 1.50 And 1.75 Will Do Up To 3/16 Plate Using A 20 Ton Press		$150.00
ac000200s-3	Large Dimple Die Set Includes: 2.00 - 2.50 And 3.00 Will Do Up To 3/16 Plate Using A 20 Ton Press		$210.00

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac000200-150	Dimple Die For 1.50 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$52.00
an-ha18-3-st	An 1/8 Npt Male To #3 Male Straight Hose Adapter Typically Used For Brakes Anodized Black		$5.50
ac702002n-120	4130 Chromoly Weld In Tube Clamp Connector For 1.50 Inch Diameter 0.120 Wall Tube		$33.00
ac000200-050	Dimple Die For 0.50 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$24.00
ac000200-125	Dimple Die For 1.25 Inch Hole Will Do Up To 3/16 Plate Using A 20 Ton Hydraulic Press		$42.00
ac703240	Mounting Tab With 5/16-24 Threaded Nut 1/8 Thick To Weld On The Side Of A Tube		$2.95
ac703240-1	Mounting Tab With 3/8-24 Threaded Nut 1/8 Thick To Weld On The Side Of A Tube		$2.95
ac823010	Flat Aviation Push Button Snapping Latch Assembly For Trunk Wing, Roof Access, Glove Box Compartment		$22.65