Monthly Specials

Kennedy Engine Adapter Mounting Studs For 5 Or 6 Rib Volkswagen Bus 091 Transmission

Country Of Origin: U.S.A.
Quantity in Basket: None
Part Number: adapter-hw-091

Price: $39.00

Sold As: 4 Adapter Studs

Quantity:

These heavy duty grade 10.9 engine adapter studs are machined specifically for Kennedy's engine adapter plates to hold the plate to your transmission.

Dimensions:
10mm x 1.50 Thread
One Stud at 120mm Long for the starter side
Three Studs at 85mm Long

If you're uncertain if your bus transmission has a 002 or a 091 bell housing measure the depth from where the starter bolts on to the transmission down to the starter bushing. If the distance from where the starter mounts on to the transmission to the starter bushing is 2 inches then you need to use the 002 bus studs. If the distance from where the starter mounts on to the transmission to the starter bushing is 2.5 inches then you need to use the bus 091 studs. It is VERY common for transmission builders to put the bus 002 style bell housing on a 091 transmission because the starter is cheaper in cost. So make sure you measure your transmission BEFORE you order studs.

How to measure your bus 002 or bus 091 transmission for the correct studs.

How to measure your bus 002 or bus 091 transmission for the correct studs.

Related Parts

Part Number	Name	Image	Price
adapter-hw-002	Kennedy Engine Adapter Mounting Studs For 3 Rib Volkswagen Bus 002 Transmission		$39.00
fasn10m	10mm X1.50 Thread Nyloc Nut For Engine To Transmission Or Starter To Transmission		$0.80
adapter-hw-bug	Kennedy Engine Adapter Mounting Studs For Volkswagen Bug IRS Or Swing Axle Transmission		$39.00
adapter-hw-mendeola	Kennedy Engine Adapter Mounting Studs For Mendeola Transmission		$39.00

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
fasn10m	10mm X1.50 Thread Nyloc Nut For Engine To Transmission Or Starter To Transmission		$0.80
ac000806	8mm X 1.25 Thread 20mm Long Clutch Bolt Kit With Washers Grade 10.9 - Set Of 6		$7.90
ac000143-02	Clutch Disc Alignment Tool For Type 2 Or Type 4 Vw Bus Spline 13/16 Inch Diameter 24 Spline		$6.95
141165113b	German Clutch Throw Out Bearing For Beetle Or Bus Irs 1971 And Later Or Mendeola 2D		$49.40
kep-fwhonda-200	Kennedy Adapter Flywheel For 1998-On Acura Or Honda 3.0-3.6 Liter 60 Degree V-6 Using A 200Mm Clutch		$319.00
keppilotbrg	Kennedy Pilot Bearing For Subaru And Ecotec Engine Adapter Flywheels		$19.50
kennedyplate200-stage3	Kennedy Stage 3 Pressure Plate 200mm 8 Inch Diameter Universal For Early Or Late Model		$149.50
kephondabrg	Kennedy Pilot Bearing For Acura Or Honda Engine Adapter Flywheels		$19.50