|
|
|
|
|
1/2 Inch Replacement Thru Rod Only For 5 Inch Or 6 Inch Wider Axle Beams
|
|
Quantity in Basket:
None
Part Number: ac401031-01
Sold As:
1 Thru Rod Without Nuts Or Washers
|
|
| |
Rod is 46 3/4 Inches long
For best results use a teflon washer against the arm, then the clamp nut, then a nylock nut. Especially use a nylock jam nut on the driver side because even with a pinch nut, with the arm moving up and down the driver side nuts tend to loosen up. A thru rod is required on a Volkswagen Ball Joint or King and Link Pin front axle beam when you remove the front torsion bars. Thru rods hold your arms inside of the beam and allow the front trailing arms to move independently from the driver side to the passenger side. Once you remove your torsion plates, a coil over shock, air shock, or air bag is required to support the weight of the vehicle.
A 5 inch wider beam is 39 inches wide not including the trailing arms.
A 6 inch wider beam is 40 inches wide not including the trailing arms.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
fasn12-20n |
Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color |
|
$0.80 |
|
ac401035-500 |
1/2 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds |
|
$154.50 |
|
ac401035-625 |
5/8 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds |
|
$189.50 |
|
ac401033-500n |
Replacement 1/2-20 Thread Pinch Nut For Thru Rods |
|
$9.00 |
|
ac401034-500w |
Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm |
|
$3.45 |
|
ac401030 |
1/2 Inch Thru Rod Kit With Nuts For Stock Width Front Axle Beam Does Not Include Teflon Washers |
|
$70.75 |
|
ac401030-01 |
1/2 Inch Replacement Thru Rod Only For Stock Width Axle Beams |
|
$29.20 |
|
ac401031 |
1/2 Inch Thru Rod Kit With Nuts For 5 Inch Or 6 Inch Wider Axle Beam Does Not Include Teflon Washers |
|
$75.25 |
|
ac401032 |
1/2 Inch Thru Rod Kit With Nuts For 8 Inch Wider Axle Beam Does Not Include Teflon Washers |
|
$84.90 |
|
ac401032-01 |
1/2 Inch Replacement Thru Rod Only For 8 Inch Wider Axle Beams |
|
$34.99 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac401034-500w
|
Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm
|
|
$3.45 |
|
fasn12-20n
|
Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color
|
|
$0.80 |
|
ac401033-500n
|
Replacement 1/2-20 Thread Pinch Nut For Thru Rods
|
|
$9.00 |
|
ac413116-1750
|
Usa Made White Delrin Bushings For King And Link Pin Axle Beams That Have 1.750 Inch Inner Diameter
|
|
$109.95 |
|
ac301161-1
|
Slave Saver Bracket For Bus 002/091 Transmission With 3/8 Heim Joint For Latest Rage, Empi, Or Jamar
|
|
$49.35 |
|
ac425125-24s
|
Usa Made Swaged Steel Tie Rod 24 Inches Long With 3/4-16 Thread For 6 Inch Beam With 4 Inch Arms
|
|
$44.90 |
|
ac405016-02
|
Usa Made Chromoly Spindle Nut Thrust Washer For King And Link Pin, Combo Link, Or King Kong Spindles
|
|
$19.10 |
|
f911bolt12-20x350
|
Super Heavy Duty F911 1/2-20 Fine Thread Grade 9 Hex Shock Bolt 3-1/2 Inches Long For King Or Fox
|
|
$4.50 |
|
| |
|
Your shopping cart is empty.
|
|
