Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Chromoly Axle For Porsche 930 Or 911 Turbo Cv Joints 15 5/8 Long - 1 Axle Shaft

Chromoly Axle For Porsche 930 Or 911 Turbo Cv Joints 15 5/8 Long - 1 Axle Shaft
    Quantity in Basket: None
    Part Number: ac525215-1
    Price: $175.00
    Sold As: One Chromoly 930 Axle Shaft

     
    Quantity:
     
    How To Measure An IRS Axle Length
    How to Measure IRS Axle Length:

    1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

    2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

    3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

    4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

    5.) Measure both sides of the car. It is VERY common to have unequal length axles.





    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    Jamar BP5000X Dune Buggy Pedals 3/4
    Jamar BP5000X Dune Buggy Pedals 3/4" Brake W/Foot Gas Pedal & Slave Cylinder
    Price: $409.50
    Swing Axle To IRS Conversion Kit With 26 9/16 Torsion Bars
    Swing Axle To IRS Conversion Kit With 26 9/16 Torsion Bars
    Price: $390.00
    Heavy Duty Irs Trailing Arm Pivot Brackets With Grade 9 F-911 Bolts And Tig Welded Bolt Stops
    Heavy Duty Irs Trailing Arm Pivot Brackets With Grade 9 F-911 Bolts And Tig Welded Bolt Stops
    Price: $109.95
    Jamar BP5000TX Dune Buggy Pedal Assembly 3/4
    Jamar BP5000TX Dune Buggy Pedal Assembly 3/4" Brake W/ Roller Throttle Pedal & Slave Cylinder
    Price: $389.50
    Multi-currencies display