Monthly Specials

Engle Tcs20 Turbo Camshaft 397/392 Gross Lift 436/431 Lift Using 1.1:1 Rocker Arms 294/284 Duration

Quantity in Basket: None
Part Number: englecam-tcs20

Price: $264.95

Sold As: 1 Engle Camshaft
Mfg UPC: 6220

Quantity:

Engle's TCS series turbo charger cam shafts were created with split duration for intake and exhaust and split lifts for intake and exhaust. This was done so that the exhaust valves are fully closed when the turbo charger pumps in through the intake valves. On a standard cam shaft the exhaust valves are slightly open which results in wasted boost energy because of overlap. With this camshaft there is no wasted energy.

For use with 1.1:1 or 1.25:1 rocker arms. Designed for turbo charged street cars, dune buggies, or sand rails with large displacement engines. Mid range to top end power from 3000 to 7000 RPM.

Engle Part Number: 6220

Intake Valve Lift Using 1.1:1 Rocker Arms: 0.435 Inches
Exhaust Valve Lift Using 1.1:1 Rocker Arms: 0.430 Inches

Intake Valve Lift Using 1.25:1 Rocker Arms: 0.496 Inches
Exhaust Valve Lift Using 1.25:1 Rocker Arms: 0.490 Inches

Camshaft Gross Intake Lift: 0.397 Inches
Camshaft Gross Exhaust Lift: 0.392 Inches

Intake Advertised Duration: 294 Degrees
Exhaust Advertised Duration: 284 Degrees

Intake Duration at 0.050: 253 Degrees
Exhaust Duration at 0.050: 247 Degrees

Lobe Center: 112 Degrees

Related Parts

Part Number	Name	Image	Price
ac000113	Lifter Retaining Clips - Holds 4 Lifters In Case Half While Assembling The Engine - 1 Pair		$9.00
engle-bolts1	Engle Camshaft Gear Allen Bolts Set Of 3		$6.00
engle-bolts2	Engle Camshaft Gear Hex Bolts Set Of 3		$3.95
engle-gear	Engle Aluminum Camshaft Gear For All 3 Bolt Flat Camshafts - Made In USA		$98.50
engle-keepers	Engle Heavy Duty Valve Lock Keepers Set Of 16		$14.90
engle-lifters	Engle Cam Follower Lifters Full Set Of 8 Also Known As Tappets		$84.80
engle-retainers	Engle Heavy Duty Chromoly Valve Spring Retainers Set Of 8		$40.00
engle-springs1	Engle Heavy Duty Single High Rev Valve Springs Set Of 8		$42.75
engle-springs2	Engle Heavy Duty Dual High Rev Valve Springs Set Of 16		$77.90
ac109440	Steel Straight Cut Cam Gear Set For 3 Bolt Flat Camshafts		$94.10
ac109441	Cb Performance Chromoly Straight Cut Cam Gear Set With Adjustable Washers For Cam Timing		$169.50
198541111	Standard Cam Shaft Bearing Set For Stock Vw Beetle Engines Brazilian Made		$28.60
198541111hd	Double Thrust Cam Shaft Bearing Set For Heavy Duty Vw Beetle Engines Brazilian Made		$39.75

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
101123111	Main Bearing Dowel Pin Sold Individually Five Are Needed To Do One Engine		$2.50
engle-keepers	Engle Heavy Duty Valve Lock Keepers Set Of 16		$14.90
engle-bolts1	Engle Camshaft Gear Allen Bolts Set Of 3		$6.00
engle-retainers	Engle Heavy Duty Chromoly Valve Spring Retainers Set Of 8		$40.00
engle-springs2	Engle Heavy Duty Dual High Rev Valve Springs Set Of 16		$77.90
ac000805-020	12 Point 8mm 1.25 Thread Metric Nuts For Engine, Transmission, Exhaust, Header, Or Muffler 20 Nuts		$44.50
ac109301	Cam Gear Bolts - Set Of Three		$0.75
ac105991	Crank Gear Installation Kit With Distributor Drive Pinion		$189.50