Monthly Specials

Usa Made Swaged Steel Tie Rod 11.25 Inches Long With 5/8-18 Thread Driver Side On Link Pin Beam

Quantity in Basket: None
Part Number: ac425124-11s

Price: $37.90

Sold As: 1 Swaged Steel Tie Rod

Quantity:

These heavy duty Swaged tie rods allow you to replace your factory VW tie rods and tie rod ends on your steering box with heim joints. You use a 5/8 heim joint with 1/2 inch misalignment shims that reduce the 5/8 heim to a 1/2 inch bolt. You must drill out your pitman arm and spindle to accept a 1/2 inch bolt. Using these tie rods eliminates the use of a steering damper. For off-road use only. Not intended for street use. Special order lengths are available for narrowed king and link pin axle beams.
Our USA made swaged tie rods are super strong. Swaging is a forging process in which the ends of the tie rods are compressed using dies which the tie rods are forced in to. Compressing the ends of the tie rods increases the density of the material.

We offer these swaged tie rods in both aluminum and steel. The advantage of using aluminum on your front end, is that if you hit something with your vehicle the aluminum tie rod will bend before your arms, spindles, or other expensive front end components. The aluminum tie rod would be your "weak point" and tie rods are much cheaper than replacing arms, spindles, or other front end components.

For the hardcore racer or heavy duty sand rail, baja bug, or rock crawler we offer the swaged steel tie rods that are less forgiving in an accident.

Related Parts

Part Number	Name	Image	Price
ac425124-27s	Usa Made Swaged Steel Tie Rod 27 Inches Long With 5/8-18 Thread Passenger Side For Bj Or Lp Beam		$40.30
fkrodendjmx10t	Fk Rod Ends Usa Made 5/8 Teflon Coated Right Hand Thread Chromoly Rod End Heim Joint With 5/8 Hole		$46.15
fkrodendjmxl10t	Fk Rod Ends Usa Made 5/8 Teflon Coated Left Hand Thread Chromoly Rod End Heim Joint With 5/8 Hole		$46.15
ma581212	Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 1/2 Inch Height		$10.05
ma581214	Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 1/4 Inch Height		$13.99
fasn58-18jlh	5/8-18 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends		$1.35
fasn58-18jrh	5/8-18 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends		$0.80
ac430004	King Pin Spindle Gusset Kit To Support The Tie Rod Hole When You Drill It For A Heim Or Ford Tie Rod		$25.20

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
fasn58-18jlh	5/8-18 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends		$1.35
ac430004	King Pin Spindle Gusset Kit To Support The Tie Rod Hole When You Drill It For A Heim Or Ford Tie Rod		$25.20
ac425124-26s	Usa Made Swaged Steel Tie Rod 26 Inches Long With 5/8-18 Thread		$40.30
fasn58-18jrh	5/8-18 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends		$0.80
ac415102-7	Deluxe Steering Wheel Quick Disconnect For 7/8 Steering Shaft - Standard Grant 3 Bolt Pattern		$73.65
415417111	Stock German Made Steering Coupler Rag Joint For Steering Shaft On All Standard Beetles Up To 1977		$34.25
ac425124-27s	Usa Made Swaged Steel Tie Rod 27 Inches Long With 5/8-18 Thread Passenger Side For Bj Or Lp Beam		$40.30
fkrodendcfl10	Fk Rod Ends Usa Made 5/8 Female Left Hand Thread Light Duty Rod End Heim Joint With 5/8 Hole		$13.00

Your shopping cart is empty.

New Products

Nitrogen Shock Fill Kit, No Loss Air Chuck, Relief Valve, And Regulator Hookup
Price: $294.00

Kennedy Engine Adapter For Honda/Acura K20a, K24z 4 Cylinder Engines To 002 Trans, KEP #7421
Price: $569.00

VW Bug Clutch Adapter Kit 5/8 Jamar Master Cylinder Converts Clutch Cable To Hydraulic, USA Made
Price: $359.00

VW Ball Joint Beam Adapter Jig To Convert To King Pin And 2.25" Extended Trailing Arms, USA Made
Price: $350.00