Monthly Specials

1/2 Inch Replacement Thru Rod Only For Stock Width Axle Beams

Quantity in Basket: None
Part Number: ac401030-01

Price: $29.20

Sold As: 1 Thru Rod Without Nuts Or Washers

Quantity:

Rod is 40 1/2 Inches long

For best results use a teflon washer against the arm, then the clamp nut, then a nylock nut. Especially use a nylock jam nut on the driver side because even with a pinch nut, with the arm moving up and down the driver side nuts tend to loosen up. A thru rod is required on a Volkswagen Ball Joint or King and Link Pin front axle beam when you remove the front torsion bars. Thru rods hold your arms inside of the beam and allow the front trailing arms to move independently from the driver side to the passenger side. Once you remove your torsion plates, a coil over shock, air shock, or air bag is required to support the weight of the vehicle.

A stock width beam is 34 inches wide not including the trailing arms.

Related Parts

Part Number	Name	Image	Price
fasn12-20n	Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color		$0.80
ac401035-500	1/2 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds		$154.50
ac401035-625	5/8 Inch Diameter American Made Chromoly Thru Rod With Nuts Custom Made To Length No Refunds		$189.50
ac401033-500n	Replacement 1/2-20 Thread Pinch Nut For Thru Rods		$9.00
ac401034-500w	Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm		$3.45
ac401030	1/2 Inch Thru Rod Kit With Nuts For Stock Width Front Axle Beam Does Not Include Teflon Washers		$70.75
ac401031	1/2 Inch Thru Rod Kit With Nuts For 5 Inch Or 6 Inch Wider Axle Beam Does Not Include Teflon Washers		$75.25
ac401031-01	1/2 Inch Replacement Thru Rod Only For 5 Inch Or 6 Inch Wider Axle Beams		$29.20
ac401032	1/2 Inch Thru Rod Kit With Nuts For 8 Inch Wider Axle Beam Does Not Include Teflon Washers		$84.90
ac401032-01	1/2 Inch Replacement Thru Rod Only For 8 Inch Wider Axle Beams		$34.99

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac401033-500n	Replacement 1/2-20 Thread Pinch Nut For Thru Rods		$9.00
ac401034-500w	Thru Rod Bronze Washer With 1/2 Inch Id Hole To Go Between Thru Rod Nut And Front Trailing Arm		$3.45
fasn12-20n	Grade 8 Fine Thread 1/2-20 Nylock Hex Nut Zinc Plated Gold Color		$0.80
ac000119	Adjustable Push Rod Measuring Tool For Setting Up Rocker Arm Geometry		$13.50
ac903112s	Shim For Ac903125 Or Ac903126 Billet Alternator Or Generator Pulleys Does Not Fit Stock Pulleys		$5.00
douglaswheel155-04	Douglas Aluminum Sand Rail Wheel 15 Inch Diameter 12 Inch Wide 5 Lug Vw For 12Mm Lugs 2 Inch Back		$236.25
ac413111	Urethane Front Trailing Arm Torsion Seals For Upper And Lower Arms 1966 To 1977 Ball Joint Front End		$24.10
ac903861nut	Chrome 12mm-1.5 Thread Alternator Or Generator Pulley Cap Nut Without Cone Washer		$5.95