|
|
|
|
|
Engle Tcs30 Turbo Camshaft 419/418 Gross Lift 461/460 Lift Using 1.1:1 Rocker Arms 308/301 Duration
|
|
Quantity in Basket:
None
Part Number: englecam-tcs30
Sold As:
1 Engle Camshaft
Mfg UPC: 6230
|
|
| |
Engle's TCS series turbo charger cam shafts were created with split duration for intake and exhaust and split lifts for intake and exhaust. This was done so that the exhaust valves are fully closed when the turbo charger pumps in through the intake valves. On a standard cam shaft the exhaust valves are slightly open which results in wasted boost energy because of overlap. With this camshaft there is no wasted energy.
For use with 1.1:1 or 1.25:1 rocker arms. Designed for turbo charged drag racing or off-road competition only. Large top end power from 4000 to 8000 RPM.
Engle Part Number: 6230
Intake Valve Lift Using 1.1:1 Rocker Arms: 0.461 Inches
Exhaust Valve Lift Using 1.1:1 Rocker Arms: 0.460 Inches
Intake Valve Lift Using 1.25:1 Rocker Arms: 0.524 Inches
Exhaust Valve Lift Using 1.25:1 Rocker Arms: 0.523 Inches
Camshaft Gross Intake Lift: 0.419 Inches
Camshaft Gross Exhaust Lift: 0.418 Inches
Intake Advertised Duration: 308 Degrees
Exhaust Advertised Duration: 301 Degrees
Intake Duration at 0.050: 267 Degrees
Exhaust Duration at 0.050: 262 Degrees
Lobe Center: 112 Degrees
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac000113 |
Lifter Retaining Clips - Holds 4 Lifters In Case Half While Assembling The Engine - 1 Pair |
|
$9.00 |
|
engle-bolts1 |
Engle Camshaft Gear Allen Bolts Set Of 3 |
|
$6.00 |
|
engle-bolts2 |
Engle Camshaft Gear Hex Bolts Set Of 3 |
|
$3.95 |
|
engle-gear |
Engle Aluminum Camshaft Gear For All 3 Bolt Flat Camshafts - Made In USA |
|
$98.50 |
|
engle-keepers |
Engle Heavy Duty Valve Lock Keepers Set Of 16 |
|
$14.90 |
|
engle-lifters |
Engle Cam Follower Lifters Full Set Of 8 Also Known As Tappets |
|
$84.80 |
|
engle-retainers |
Engle Heavy Duty Chromoly Valve Spring Retainers Set Of 8 |
|
$40.00 |
|
engle-springs1 |
Engle Heavy Duty Single High Rev Valve Springs Set Of 8 |
|
$42.75 |
|
engle-springs2 |
Engle Heavy Duty Dual High Rev Valve Springs Set Of 16 |
|
$77.90 |
|
ac109440 |
Steel Straight Cut Cam Gear Set For 3 Bolt Flat Camshafts |
|
$94.10 |
|
ac109441 |
Cb Performance Chromoly Straight Cut Cam Gear Set With Adjustable Washers For Cam Timing |
|
$169.50 |
|
198541111 |
Standard Cam Shaft Bearing Set For Stock Vw Beetle Engines Brazilian Made |
|
$28.60 |
|
198541111hd |
Double Thrust Cam Shaft Bearing Set For Heavy Duty Vw Beetle Engines Brazilian Made |
|
$39.75 |
|
| |
|
Your shopping cart is empty.
|
|
