Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Micro Stub Trailing Arm Kit With 3X3 Arms, Disc Brakes, 4 Piston Wilwood Calipers, & Delrin Bushing

Micro Stub Trailing Arm Kit With 3X3 Arms, Disc Brakes, 4 Piston Wilwood Calipers, & Delrin Bushing
    Quantity in Basket: None
    Part Number: ac598995
    Price: $1,752.75
    Sold As: 1 Kit

     
    Quantity:
     
    Kit Includes:

    2 - 3x3 Trailing Arms
    4 - "Shark Fin" Shock Tabs
    2 - Urethane Bushings
    2 - Wilwood 4 Piston Calipers
    2 - Micro Stub Axles for Porsche 930 CV Joints
    2 - Rotors
    2 - Bearing Assemblies
    2 - Axle Nuts
    12 - CV Joint Bolts

    The key benefit of a micro stub assembly is the stub axle is shorter providing greater strength and also the CV joint will be further away from the transmission, allowing you to use a longer axle with less CV angle to get more wheel travel.

    To measure the appropriate axle for your vehicle, install the arms complete with the brakes on the vehicle. Once installed, jack the trailing arm up so that the CV joint on the arm would be straight across from the CV joint on the transmission so the axle would be at zero degrees. This is important because you need your shortest length to purchase an axle otherwise when the arm travels upward it would force the axle into the transmission. After you have jacked the arm up to zero degrees, measure from the center portion of the stub axle to the center point on your drive flange on the side of the transmission. Do not measure from where the CV joint bolts on. You measure from center of cup to center of cup to get the "plunge" distance. Once you have that length, you typically subtract 3/8" to 1/4" for your axle length. Be sure to measure both sides of the vehicle, because most transmissions are not centered in the vehicle, and you may need to purchase two different lengths of axle. If you have any further questions about this you can call us at 951-738-8380.



    Related Parts
    Part Number Name Image Price  
    cnc642t Cnc Rear Micro Stub Disc Brake Kit Large 2 Piston Calipers Standard Bearing Assemblies With Tubes Cnc Rear Micro Stub Disc Brake Kit Large 2 Piston Calipers Standard Bearing Assemblies With Tubes
    $1,423.00
    ac501935-930 3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joints 3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joints
    $2.75
    ac501935-930d 3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joint Drilled For Safety Wire 3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joint Drilled For Safety Wire
    $4.25
    porsche930cv-german Lobro Gkn German Made Stock Porsche 930 Or 911 Turbo Cv Joint Lobro Gkn German Made Stock Porsche 930  Or 911 Turbo Cv Joint
    $99.00
    porsche930cv-empi-1 Empi Stage 1 Porsche 930 Or 911 Turbo Cv Joint With Chromoly Cage Empi Stage 1 Porsche 930 Or 911 Turbo Cv Joint With Chromoly Cage
    $54.75
    porsche930cv-proam-lp Pro-Am Porsche 930 Or 911 Turbo Cv Joint Race Prepped And Lightened For Class 1600 With 300M Cage Pro-Am Porsche 930  Or 911 Turbo Cv Joint Race Prepped And Lightened For Class 1600 With 300M Cage
    $256.50
    porsche930cv-empi-2 Empi Stage 2 Porsche 930 Or 911 Turbo Cv Joint Race Prepped With Chromoly Cage Empi Stage 2 Porsche 930  Or 911 Turbo Cv Joint Race Prepped With Chromoly Cage
    $64.75
    porsche930cv-empi-3 Empi Stage 3 Porsche 930 Or 911 Turbo Cv Joint Race Prepped, Lightened, Chromoly Cage Class 1600 Empi Stage 3 Porsche 930 Or 911 Turbo Cv Joint Race Prepped, Lightened, Chromoly Cage Class 1600
    $125.25
    ac598100 Empi 16-2510 Race Trim Micro Stub Disc Brake Kit For 930 Cv Joints With 4 Piston Calipers And Micro Empi 16-2510 Race Trim Micro Stub Disc Brake Kit For 930 Cv Joints With 4 Piston Calipers And Micro
    $1,437.00
    ac598110 Race Trim Micro Stub Disc Brake Kit For Porsche 934 Or 935 Cv Joints 4 Piston Calipers And Micro Stu Race Trim Micro Stub Disc Brake Kit For Porsche 934 Or 935 Cv Joints 4 Piston Calipers And Micro Stu
    $1,437.00



    Customers who purchased this product, also purchased:
    Part Number Name Image Price 
    ac501360k Irs Spring Plate Conversion Kit For Custom Torsion Housing For Coil Over Shocks Or Air Bags Irs Spring Plate Conversion Kit For Custom Torsion Housing For Coil Over Shocks Or Air Bags $179.25
    ac530004 Irs Trailing Arm Pivot Brackets For Stock Torsion Housing Using Frame Horns Requires Jig Irs Trailing Arm Pivot Brackets For Stock Torsion Housing Using Frame Horns Requires Jig $31.00
    ac530010 Type 1 Beetle Aftermarket Irs Rear Trailing Arm Pivot Bolt With 17Mm Hex Head Type 1 Beetle Aftermarket Irs Rear Trailing Arm Pivot Bolt With 17Mm Hex Head $21.00
    ac501362 Usa Made Tig Welded Irs Spring Plate Kit Racing Reinforcement Cover Plates Usa Made Tig Welded Irs Spring Plate Kit Racing Reinforcement Cover Plates $149.00
    ac413055-625 Chromoly Material Heavy Duty 5/8 Link Pin Set For Aftermarket Front Trailing Arms Chromoly Material Heavy Duty 5/8 Link Pin Set For Aftermarket Front Trailing Arms $71.50
    ac530011 Irs Trailing Arm Pivot Brackets For Custom Torsion Housing That Doesnt Have Frame Horns Irs Trailing Arm Pivot Brackets For Custom Torsion Housing That Doesnt Have Frame Horns $33.75
    ac000155 Usa Made Irs Pivot Mount Installation Jigs Aids In Proper Positioning Of Irs Pivot Mounts No Refunds Usa Made Irs Pivot Mount Installation Jigs Aids In Proper Positioning Of Irs Pivot Mounts No Refunds $108.75
    ac498550 Jamar Performance Pro-X Front Disc Brake Kit For Combo Link Front Spindles Jamar Performance Pro-X Front Disc Brake Kit For Combo Link Front Spindles $1,003.75



    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    Pacific Customs Front King And Link Pin Trailing Arms 4 Inch Longer 1.875 Wider For Coil Over Shocks
    Pacific Customs Front King And Link Pin Trailing Arms 4 Inch Longer 1.875 Wider For Coil Over Shocks
    Price: $695.00
    Vw Bug Type 1 Front Bearing Kit for 1968-1979 Ball Joint Front End With Drum Brakes
    Vw Bug Type 1 Front Bearing Kit for 1968-1979 Ball Joint Front End With Drum Brakes
    Price: $54.15
    VW Bug Type 1 Front Bearing Kit for 1958-65 King Pin Front End With Drum Brakes
    VW Bug Type 1 Front Bearing Kit for 1958-65 King Pin Front End With Drum Brakes
    Price: $49.00
    King Shocks Black Anodized Engraved With Size Spanner Nut Wrench For King 2.0 Shocks
    King Shocks Black Anodized Engraved With Size Spanner Nut Wrench For King 2.0 Shocks
    Price: $36.00
    Multi-currencies display