Monthly Specials

Chromoly Axles For Porsche 930 Or 911 Turbo Cv Joints 24 Long - 1 Pair

Quantity in Basket: None
Part Number: ac525224

Price: $319.90

Sold As: Pair
Mfg UPC: EMPI 16-2219-0

Quantity:

How to Measure IRS Axle Length:

1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

5.) Measure both sides of the car. It is VERY common to have unequal length axles.

Related Parts

Part Number	Name	Image	Price
ac525209-930	Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4		$13.00

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac525209-930	Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4		$13.00
porsche930cv-empi-2	Empi 87-9470-B Stage 2 Porsche 930 Or 911 Turbo Cv Joint Race Prepped With Chromoly Cage		$92.95
ac501111fktk-930	Usa Made Porsche 930 Cv Joint Chromoly Axle Boot Retaining Flange For Ac501111B-930 Mini Max Boot		$62.50
ac501111b-930	Porsche 930 Or 911 Turbo Cv Mini Max Cone Shaped Axle Boot Must Use Flange Number Ac501111Fktk-930		$15.10
ac750741-2	Weld On Flat 90 Degree Gusset With One 1/2 Hole And Curved Edge		$2.40
ac501111be-930	Porsche 930 Cv Barrel Shape Axle Boot Must Use Flange Number Ac501111Fprm-930 Or Ac501111Fe-930		$18.10
ac501111fe-930	Porsche 930 Cv Joint Axle Boot Retaining Flange For Ac501111Be-930 Barrel Shaped Boots		$34.90
ac525112-33e	Empi 33 Spline Chromoly Micro Stub Axle For Porsche 930 Cv Joints		$199.50