Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Fox Shocks 1.100 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft

Fox Shocks 1.100 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    Quantity in Basket: None
    Part Number: foxshim-1100
    Price: $5.50
    Sold As: 1 Valving Shim

     
    Available Thickness:
    0.008
    0.010
    0.012
    0.015
       
    Quantity:
     
    By changing the quantity, thickness, and arrangement of the valve shims, you can tune the shock for different operating characteristics. There is a valve stack on both sides of the damper piston. The bottom side of the piston controls compression damping, and the top side controls rebound damping.

    The rebound valve shim stack, in most cases, will have a smaller outside diameter than compression valve shims do and the valve shims will usually be thicker when compared to the compression valve shims. This is due to rebound damping having to resist the force of the spring, and because piston speeds are much slower during rebound.

    There is an unlimited amount of valving combinations, so many different variations will achieve very similar results. Many suspension technicians that routinely tune suspensions will have different ideas regarding how to increase or decrease damping with valve shims. As long as the rider is happy with the changes, this is what matters most, not how one achieved the results.

    You should consider working on shock valving only after you have determined the correct rear shock sag setting for the application. Also, make sure that everything in your suspension is well lubricated and is moving freely.

    On a bypass shock if the compression damping adjustments are full in "closed", you should be thinking about adding compression valve shims. If your compression damping adjustment is full out "open", and your suspension is still feeling over-damped, you should be thinking about removing compression valve shims.

    In general, the rebound damping does not need to be changed unless the spring rate is changed. If you increase the spring rate, a corresponding increase in valve resistance is recommended.

    It is better to use more thin shims than a few thicker shims as the thin shims will provide better, smoother damping.

    However, two .006" thick shims do not equal one .012" thick shim, as the two thinner shims would deflect more (be softer) than the single thick shim.

    If you are using a progressive stack with a gap shim in place, by making the gap shim thicker, the shock becomes softer. You would think that a thicker shim would make the shock stiffer, yet what really happens is the thicker small diameter gap shim lets the large shims deflect further before hitting the next line of progressive shims in the second stage stack, thus making the shock softer.

    Another alternative is to go to a different diameter gap shim. As mentioned previously, the valving combinations are endless.



    Related Parts
    Part Number Name Image Price  
    fox81500036a-blk Fox 2.0 Remote Reservoir Shock Cd Adjuster Allows Compression Adjustment Without Taking Shock Apart Fox 2.0 Remote Reservoir Shock Cd Adjuster Allows Compression Adjustment Without Taking Shock Apart
    $114.00
    foxshim-0750 Fox Shocks 0.750 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 0.750 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-0800 Fox Shocks 0.800 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 0.800 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-0875 Fox Shocks 0.875 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 0.875 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-0950 Fox Shocks 0.950 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 0.950 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-1350 Fox Shocks 1.350 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.350 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-1425 Fox Shocks 1.425 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.425 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-1570 Fox Shocks 1.570 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.570 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-1600 Fox Shocks 1.600 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.600 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-1800 Fox Shocks 1.800 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.800 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    foxshim-2000 Fox Shocks 2.000 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 2.000 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft
    $5.50
    fox80300009a Fox Shocks 2 Inch Body Emulsion Shock Seal Rebuild Kit For 0.625 Inch Diameter Shaft Fox Shocks 2 Inch Body Emulsion Shock Seal Rebuild Kit For 0.625 Inch Diameter Shaft
    $7.00
    fox80300010a Fox Shocks 2 Inch Body Reservoir Shock Seal Rebuild Kit For 0.625 Inch Diameter Shaft Fox Shocks 2 Inch Body Reservoir Shock Seal Rebuild Kit For 0.625 Inch Diameter Shaft
    $12.00
    fox80300015a Fox Shocks 2 Inch Body Reservoir Shock Seal Rebuild Kit For 0.875 Inch Diameter Shaft Fox Shocks 2 Inch Body Reservoir Shock Seal Rebuild Kit For 0.875 Inch Diameter Shaft
    $12.00
    fox80300024a Fox Shocks 2 Inch Body Emulsion Shock Seal Rebuild Kit For 0.875 Inch Diameter Shaft Fox Shocks 2 Inch Body Emulsion Shock Seal Rebuild Kit For 0.875 Inch Diameter Shaft
    $8.00
    fox39800094a Fox 5/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals Fox 5/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals
    $16.00
    fox39800095a Fox 7/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals Fox 7/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals
    $16.00



    Customers who purchased this product, also purchased:
    Part Number Name Image Price 
    foxoil Fox Shocks Blue Standard 5W Shock Oil 1 Gallon Container Fox Shocks Blue Standard 5W Shock Oil 1 Gallon Container $34.00
    foxoil1q Fox Shocks Blue Standard 5W Shock Oil 1 Quart Container Fox Shocks Blue Standard 5W Shock Oil 1 Quart Container $12.00
    fox39800094a Fox 5/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals Fox 5/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals $16.00
    fox39800095a Fox 7/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals Fox 7/8 Shaft Protective Tapered Bullet Allows You To Install The Shock Shaft Without Damaging Seals $16.00
    foxshim-1350 Fox Shocks 1.350 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.350 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft $5.50
    foxshim-0950 Fox Shocks 0.950 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 0.950 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft $5.50
    foxshim-1425 Fox Shocks 1.425 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 1.425 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft $5.50
    foxshim-0800 Fox Shocks 0.800 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft Fox Shocks 0.800 Diameter Valving Shim For Fox 2.0 - 2.5 - 3.0 Shocks With 5/8 - 7/8 Or 1-1/4 Shaft $5.50



    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    Heavy Duty 3X3 Heim Spring Plate Conversion Kit fits Stock VW Torsion Housing For Coil Suspension
    Heavy Duty 3X3 Heim Spring Plate Conversion Kit fits Stock VW Torsion Housing For Coil Suspension
    Price: $499.00
    Type 1 Clutch Kit, Late Model Pressure Plate, Metal Woven Disc, Late Throwout Bearing And Alignment
    Type 1 Clutch Kit, Late Model Pressure Plate, Metal Woven Disc, Late Throwout Bearing And Alignment
    Price: $153.00
    VW Long Travel Sand Rail / Baja Bug Front Coil Suspension Kit 12 Inches Travel
    VW Long Travel Sand Rail / Baja Bug Front Coil Suspension Kit 12 Inches Travel
    Price: $2,995.00
    Vw Bug Type 1 Front Bearing Kit for 1968-1979 Ball Joint Front End With Disc Brakes
    Vw Bug Type 1 Front Bearing Kit for 1968-1979 Ball Joint Front End With Disc Brakes
    Price: $52.25
    Multi-currencies display