Monthly Specials

Porsche 930 Conversion Kit for Type 2 VW Bus 002 Transmission To 930 Cv Joints

Quantity in Basket: None
Part Number: ac598232

Price: $1,295.00

Sold As: Complete Conversion Kit

What Length Axles Do You Require? Price may vary by axle.:
	19 1/4 Inches
	20 1/4 Inches
	22 Inches +$15.50
	23 Inches +$20.50
	24 Inches +$21.25
	25 Inches +$31.50
	26 Inches +$31.50
	27 Inches +$31.50
	28 Inches +$31.50

Quantity:

Kit Includes:
2 - Type 1 to 930 Chromoly Stub Axles
2 - Type 2 002 to 930 Chromoly Drive Flanges
2 - Porsche 930 Chromoly Axles(Choose Your Length. Price varies by axle length
4 - Porsche 930 Race Prepd CV Joints With Chromoly Cage
4 - CV Joints Flanges
4 - CV Joint Boots
24 - CV Joint Bolts
2 - Swepco 101 Bottles
1 - Bearings And Seals Kit

How To Measure An IRS Axle Length

How to Measure IRS Axle Length:

1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

5.) Measure both sides of the car. It is VERY common to have unequal length axles.

Related Parts

Part Number	Name	Image	Price
ac520101	Steel Irs Axle Spacer Kit 6 Spacers Total For Both Sides Of The Car		$48.20
501299113	Rear Inner Irs Bearing Housing Snap Ring For 1969 To 1979 Beetle And Will Also Fit Aftermarket Arms		$6.90
ac525111	Chromoly Adapter Stub Axle With Type-1 Beetle Shaft To Porsche 930 Cv Joint		$99.95
ac525125	37 Spline Adapter Chromoly Drive Flange For Type-2 Bus 002 Transmission To A Porsche 930 Cv Joint		$64.95
ac598990b	Bearing And Seal Kit For Both Rear Irs Trailing Arms		$109.98
swepco101	SWEPCO 101 #2 Moly High Temperature Cv Joint Grease 14.40 Oz Tube 1 Tube Typically Does 2 Cv Joints		$19.99
ac000135-930	3/8 Drive Socket For 12 Point 930 CV Joint Bolts - Works With AC501935-930		$18.00
ac501935-930	3/8-24 2.25 Inch Long 12 Point Bolt For Porsche 930 Or 911 Turbo Cv Joints		$2.90
ac525209-930	Heavy Duty Spiral Locks For Porsche 930 Or 911 Turbo Axles Set Of 4		$13.00
ac530014e	Class 5/1600 Or 12/1600 Irs Rear Mild Steel Boxed In Stock X 1 Inch Longer Trailing Arms, Pair		$429.00
ac530015e	Irs 3x3 Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms With Beetle Bearing Housing		$489.00

Customers who purchased this product, also purchased:

Part Number	Name	Image	Price
ac301161-1	Slave Saver Bracket For Bus 002/091 Transmission With 3/8 Heim Joint For Latest Rage, Empi, Or Jamar		$49.35
415061113c	Steering Box For All Standard Beetles To 1977 But For 1961 And Earlier You Must Change Pitman Arm		$319.90
jamar-jca3-3434	Jamar JCA3 Floor Mount Dual Master Cylinder Brake Pedal Assembly With 3/4 X 3/4 Bore		$629.50
ac598050-5vw	Pacific Customs 5 Lug VW IRS Rear Disc Brake Kit With 4 Piston Calipers		$699.98
ac405030h	Combo Link Heavy Duty Spindles For 5/8 Heim Joints - Stock Height		$498.70
saco94-3022	Saco Usa Made Irs Trailing Arm Pivot Bushing Set		$64.00
301189002c	002 Bus Transmission Drive Flange Seal For Flange To Transmission, Does Not Fit 68		$10.05
ac799561	Polished Finish Clutch Slave Cylinder For Type 2 Bus Or Mendeola Transmissions		$119.50