Autometer Gauges CNC Brakes EMPI Douglas Wheel Technology Fox Shocks Jamar Performance k4 Switches



Usa Made Irs Rear Chromoly 5 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes

Usa Made Irs Rear Chromoly 5 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes
    Country Of Origin: USA
    Quantity in Basket: None
    Part Number: ac530017cm
    Price: $823.00
    Sold As: 1 Driver Side And 1 Passenger Side Rear Trailing Arm

     
    Quantity:
     
    This set of rear 3 x 5 IRS rear trailing arms uses the standard "small bearing" micro stub brake kits that fit into a 3-5/8 inch hole. A micro stub arm and brake kit is better than your standard beetle trailing arm kit because the wheel hub puts your tire in the same position as a regular beetle 3 x 5 arm. However the CV joint is sitting further out towards the tire. Because the CV joint is sitting further out you can use a much longer axle. A longer axle gives you a much more relaxed angle on your CV joint which allows for a lot more wheel travel. In addition to the extra wheel travel, a micro stub axle is shorter and larger in diameter than a beetle stub axle, which makes the stub axle a lot stronger. The arms do not have shock mounts welded to them allowing you to position the shock where ever is necessary for your sand rail, baja bug, or manx.

    The term 3 by 5 refers to the amount of inches wider and longer than a stock beetle trailing arm. On this particular set of arms they are 3 inches wider per side and 5 inches further towards the rear of the vehicle. Axle length could change based on your wheel alignment toe in or toe out and also where you have your transmission mounted in relation to the trailing arms. It is important to check your own axle length BEFORE you mount the axles on the vehicle.

    How To Measure An IRS Axle Length
    How to Measure IRS Axle Length:

    1.) First adjust your rear wheel alignment toe in. If your tires are toed out like a duck your trailing arms will be closer to your transmission resulting in a shorter axle.

    2.) Lift the trailing arm so that if you did have an axle it would be parallel to the floor at zero degrees. This is your shortest point.

    3.) Measure from the center of the drive flange on your transmission to the center of the stub axle on your trailing arm. DO NOT measure where your CV joint mounting surface is. You need to measure the bottom of each cup because this is where your axle will plunge into. If you purchase too long of an axle, when your trailing arm moves upward to zero degrees it will shove the axle into the transmission. This will mushroom the ends of your axles and eventually crush the ring gear inside your transmission.

    4.) After you have measured this distance, you subtract 1/4 inch total length. For instance if you measure from the center of the drive flange to the center of the stub axle and you get 20 1/2 inches you would buy a 20 1/4 axle.

    5.) Measure both sides of the car. It is VERY common to have unequal length axles.



    Related Parts
    Part Number Name Image Price  
    ac530020d Usa Made Delrin Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot Point Usa Made Delrin Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot Point
    $72.00
    ac530020 Urethane Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot Urethane Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot
    $29.00
    ac598100 Empi 16-2510 Race Trim Micro Stub Disc Brake Kit For 930 Cv Joints With 4 Piston Calipers And Micro Empi 16-2510 Race Trim Micro Stub Disc Brake Kit For 930 Cv Joints With 4 Piston Calipers And Micro
    $1,437.00
    ac598555 Jamar Performance Pro-X Rear Micro Stub Disc Brake Kit For Porsche 930 Cv Joints Jamar Performance Pro-X Rear Micro Stub Disc Brake Kit For Porsche 930 Cv Joints
    $1,694.00
    proam-ms1000e Pro-Am Micro Stub Kit,930 Sportsman,11 Rotor,Large 4 Piston Caliper Pro-Am Micro Stub Kit,930 Sportsman,11 Rotor,Large 4 Piston Caliper
    $1,593.00
    ac750720 Weld On Single Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Hole Weld On Single Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Hole
    $6.50
    ac750721 Weld On Dual Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Holes - Holes Are 4.5 Apart Weld On Dual Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Holes - Holes Are 4.5 Apart
    $8.50
    ac530015ms Usa Made Irs Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes Usa Made Irs Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes
    $573.75
    ac530015mscm Usa Made Irs Rear Chromoly 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes Usa Made Irs Rear Chromoly 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes
    $802.00
    ac530016 Irs Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes Irs Rear Mild Steel 3 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes
    $371.00
    ac530017 Usa Made Irs Rear Mild Steel 5 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes Usa Made Irs Rear Mild Steel 5 Inch Longer 3 Inch Wider Trailing Arms For Micro Stub Disc Brakes
    $587.25
    ac598995 Micro Stub Trailing Arm Kit With 3X3 Arms, Disc Brakes, 4 Piston Wilwood Calipers, & Delrin Bushing Micro Stub Trailing Arm Kit With 3X3 Arms, Disc Brakes, 4 Piston Wilwood Calipers, & Delrin Bushing
    $1,752.75



    Customers who purchased this product, also purchased:
    Part Number Name Image Price 
    ac530020d Usa Made Delrin Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot Point Usa Made Delrin Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot Point $72.00
    ac530020 Urethane Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot Urethane Irs Rear Trailing Arm Bushings For Stock Or Aftermarket Arms On Stock Pivot $29.00
    ac750720 Weld On Single Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Hole Weld On Single Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Hole $6.50
    ac750721 Weld On Dual Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Holes - Holes Are 4.5 Apart Weld On Dual Shock Mounting Bracket 3/16 Thick Steel With 1/2 Id Holes - Holes Are 4.5 Apart $8.50
    ac501112f-930 Porsche 930 Or 911 Turbo Cv Chromoly Large Axle Boot Flange For Ac501112B-930 Axle Boot Porsche 930 Or 911 Turbo Cv Chromoly Large Axle Boot Flange For Ac501112B-930 Axle Boot $24.75
    ac501112b-930 Porsche 930 Or 911 Turbo Cv Large Axle Boot Use Flange Ac501112F-930 Porsche 930 Or 911 Turbo Cv Large Axle Boot Use Flange Ac501112F-930 $14.25
    ma345812 Usa Stainless Steel Misalignment Shim For 3/4 Inch Heim Or Uniball For 5/8 Inch Bolt 1/2 Inch Height Usa Stainless Steel Misalignment Shim For 3/4 Inch Heim Or Uniball For 5/8 Inch Bolt 1/2 Inch Height $9.50
    fkrodendjmx12t Fk Rod Ends Usa Made 3/4 Teflon Coated Right Hand Thread Chromoly Rod End Heim Joint With 3/4 Hole Fk Rod Ends Usa Made 3/4 Teflon Coated Right Hand Thread Chromoly Rod End Heim Joint With 3/4 Hole $46.50



    Pacific Customs Wholesale Program

    Pacific Customs Shopping Cart
    Your shopping cart is empty.

     

    New Products
    VW Bug Type 1 Front Bearing Kit for 1958-65 King Pin Front End With Drum Brakes
    VW Bug Type 1 Front Bearing Kit for 1958-65 King Pin Front End With Drum Brakes
    Price: $49.00
    VW IRS 3x3 Aircraft 4130 Chromoly Tig Welded Boxed Micro Stub Trailing Arms, Made In USA
    VW IRS 3x3 Aircraft 4130 Chromoly Tig Welded Boxed Micro Stub Trailing Arms, Made In USA
    Price: $895.00
    Heavy Duty Irs Trailing Arm Pivot Brackets With Grade 9 F-911 Bolts And Tig Welded Bolt Stops
    Heavy Duty Irs Trailing Arm Pivot Brackets With Grade 9 F-911 Bolts And Tig Welded Bolt Stops
    Price: $76.75
    VW Bug Swing Axle / IRS Transmission or 002 Bus to Type 1 Beetle Engine Bolt Kit, With Half Moon Sta
    VW Bug Swing Axle / IRS Transmission or 002 Bus to Type 1 Beetle Engine Bolt Kit, With Half Moon Sta
    Price: $16.15
    Multi-currencies display