|
|
|
|
|
Usa Made Swaged Steel Tie Rod 20 Inches Long With 3/4-16 Thread For Stock Beam Using 2 1/4 Arms
|
|
Quantity in Basket:
None
Part Number: ac425125-20s
Sold As:
1 Swaged Steel Tie Rod
|
|
| |
This tie rod has left hand thread on one side and right hand thread on the other side allowing you to expand or contract the length. This tie rod is commonly used for rod ends or heim joints to create all sorts of linkage. On Hot Rods, Street Rods, sand rails, dune buggies, trucks, jeeps, or rock crawlers they are commonly used for making sway bar links, tie rods, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, or traction bars.
Our USA made swaged tie rods are super strong. Swaging is a forging process in which the ends of the tie rods are compressed using dies which the tie rods are forced in to. Compressing the ends of the tie rods increases the density of the material.
We offer these swaged tie rods in both aluminum and steel. The advantage of using aluminum on your front end, is that if you hit something with your vehicle the aluminum tie rod will bend before your arms, spindles, or other expensive front end components. The aluminum tie rod would be your "weak point" and tie rods are much cheaper than replacing arms, spindles, or other front end components.
For the hardcore racer or heavy duty sand rail, baja bug, or rock crawler we offer the swaged steel tie rods that are less forgiving in an accident.
If you have a King Pin and Link Pin front axle beam using an off road rack and pinion for heim joints, the rack and pinion will use FKHRSMXL10T heim joints with the built in misalignment shoulder. If you have combo link spindles that use 5/8 bolts for the heim joints you use FKJMX12T heims with 5/8 inch misalignment shims to get enough angle when the arm fully drops down. If you have stock King Pin and Link Pin spindles that use stock tie rod ends you can drill the tie rod hole out to 1/2 inch and use FKJMX12T heims with 1/2 inch misalignment shims to get enough angle when the arm fully drops down.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac425125-20a |
Usa Made Swaged Aluminum Tie Rod 20 Inches Long With 3/4-16 Thread For Stock Beam Using 2 1/4 Arms |
|
$40.75 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac000806
|
8mm X 1.25 Thread 20mm Long Clutch Bolt Kit With Washers Grade 10.9 - Set Of 6
|
|
$7.90 |
|
ac425121il
|
Replacement International Tie Rod End Left Hand 3/4-16 Thread For Off Road Rack And Pinions
|
|
$24.95 |
|
ac425121ir
|
Replacement International Tie Rod End Right Hand 3/4-16 Thread For Off Road Rack And Pinions
|
|
$24.95 |
|
141165113b
|
German Clutch Throw Out Bearing For Beetle Or Bus Irs 1971 And Later Or Mendeola 2D
|
|
$49.40 |
|
ac425125-19s
|
Usa Made Swaged Steel Tie Rod 19 Inches Long With 3/4-16 Thread For Stock Beam Stock Arms And Rack
|
|
$42.90 |
|
115495113
|
Oil Filler Securing Nut For Alternator Or Generator Stand On 1961 To 1979 Beetle Or 1959 To 1971 Bus
|
|
$13.00 |
|
ac501140w
|
Type 1 Beetle Oem Irs Rear Trailing Arm Pivot Bolt Washer 4 Are Required Per Car
|
|
$4.00 |
|
ac425152cl
|
Replacement Boot Clamp For Wright, Saco, Or Latest Rage Off Road Or End Load Rack And Pinions
|
|
$6.90 |
|
| |
|
Your shopping cart is empty.
|
|
