|
|
|
|
|
Usa Made Swaged Aluminum Tie Rod 19 Inche Long With 3/4-16 Thread For Stock Beam Stock Arms And Rack
|
|
Quantity in Basket:
None
Part Number: ac425125-19a
Sold As:
1 Swaged Aluminum Tie Rod
|
|
| |
This tie rod has left hand thread on one side and right hand thread on the other side allowing you to expand or contract the length. This tie rod is commonly used for rod ends or heim joints to create all sorts of linkage. On Hot Rods, Street Rods, sand rails, dune buggies, trucks, jeeps, or rock crawlers they are commonly used for making sway bar links, tie rods, pan hard bars, 3 link, 4 link, 5 link, trac bars, drag links, trailing arms, ladder bars, or traction bars.
Our USA made swaged tie rods are super strong. Swaging is a forging process in which the ends of the tie rods are compressed using dies which the tie rods are forced in to. Compressing the ends of the tie rods increases the density of the material.
We offer these swaged tie rods in both aluminum and steel. The advantage of using aluminum on your front end, is that if you hit something with your vehicle the aluminum tie rod will bend before your arms, spindles, or other expensive front end components. The aluminum tie rod would be your "weak point" and tie rods are much cheaper than replacing arms, spindles, or other front end components.
For the hardcore racer or heavy duty sand rail, baja bug, or rock crawler we offer the swaged steel tie rods that are less forgiving in an accident.
If you have a King Pin and Link Pin front axle beam using an off road rack and pinion for heim joints, the rack and pinion will use FKHRSMXL10T heim joints with the built in misalignment shoulder. If you have combo link spindles that use 5/8 bolts for the heim joints you use FKJMX12T heims with 5/8 inch misalignment shims to get enough angle when the arm fully drops down. If you have stock King Pin and Link Pin spindles that use stock tie rod ends you can drill the tie rod hole out to 1/2 inch and use FKJMX12T heims with 1/2 inch misalignment shims to get enough angle when the arm fully drops down.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac425125-19s |
Usa Made Swaged Steel Tie Rod 19 Inches Long With 3/4-16 Thread For Stock Beam Stock Arms And Rack |
|
$42.90 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
ac425121il
|
Replacement International Tie Rod End Left Hand 3/4-16 Thread For Off Road Rack And Pinions
|
|
$24.95 |
|
ac401030
|
1/2 Inch Thru Rod Kit With Nuts For Stock Width Front Axle Beam Does Not Include Teflon Washers
|
|
$70.75 |
|
ac425095
|
Heim Joint Adapter To Adapt Early VW Tie Rod Hole To 5/8 Heim Joint
|
|
$16.15 |
|
saco95-6223
|
Saco Link Pin Shims For 5/8 Link Pins To Adjust Camber On King And Link Pin Front Beams Set Of 40
|
|
$32.00 |
|
ac413116-1805
|
Usa Made White Delrin Bushings For King And Link Pin Axle Beams That Have 1.805 Inch Inner Diameter
|
|
$109.95 |
|
bushing106-75-75d
|
Usa Made Delrin Pivot Bushing 1.06 Outside Diameter 0.75 Inside Diameter 0.75 Total Length
|
|
$18.00 |
|
ac425030-12
|
12 Inch Long 3/4 Inch Diameter 48 Splined Steering Shaft Splined On One End
|
|
$28.98 |
|
fkrodendkmx10
|
Fk Rod Ends Usa Made 5/8 Male Right Hand Thread Injected Nylon Rod End Heim Joint With 5/8 Hole
|
|
$21.20 |
|
| |
|
Your shopping cart is empty.
|
|
