|
|
|
|
|
Usa Made Swaged Aluminum Tie Rod 27 Inches Long With 5/8-18 Thread Passenger Side For Bj Or Lp Beam
|
|
Quantity in Basket:
None
Part Number: ac425124-27a
Sold As:
1 Swaged Aluminum Tie Rod
|
|
| |
These heavy duty Swaged tie rods allow you to replace your factory VW tie rods and tie rod ends on your steering box with heim joints. You use a 5/8 heim joint with 1/2 inch misalignment shims that reduce the 5/8 heim to a 1/2 inch bolt. You must drill out your pitman arm and spindle to accept a 1/2 inch bolt. Using these tie rods eliminates the use of a steering damper. For off-road use only. Not intended for street use. Special order lengths are available for narrowed ball joint or king and link pin axle beams.
Our USA made swaged tie rods are super strong. Swaging is a forging process in which the ends of the tie rods are compressed using dies which the tie rods are forced in to. Compressing the ends of the tie rods increases the density of the material.
We offer these swaged tie rods in both aluminum and steel. The advantage of using aluminum on your front end, is that if you hit something with your vehicle the aluminum tie rod will bend before your arms, spindles, or other expensive front end components. The aluminum tie rod would be your "weak point" and tie rods are much cheaper than replacing arms, spindles, or other front end components.
For the hardcore racer or heavy duty sand rail, baja bug, or rock crawler we offer the swaged steel tie rods that are less forgiving in an accident.
|
Related Parts
|
Part Number |
Name |
Image |
Price |
|
|
ac425124-10a |
Usa Made Swaged Aluminum Tie Rod 10 Inches Long With 5/8-18 Thread Driver Side On Ball Joint Beam |
|
$35.75 |
|
ac425124-11a |
Usa Made Swaged Aluminum Tie Rod 11.25 Inches Long With 5/8-18 Thread Driver Side On Link Pin Beam |
|
$35.75 |
|
fkrodendjmx10t |
Fk Rod Ends Usa Made 5/8 Teflon Coated Right Hand Thread Chromoly Rod End Heim Joint With 5/8 Hole |
|
$46.15 |
|
fkrodendjmxl10t |
Fk Rod Ends Usa Made 5/8 Teflon Coated Left Hand Thread Chromoly Rod End Heim Joint With 5/8 Hole |
|
$46.15 |
|
ma581212 |
Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 1/2 Inch Height |
|
$10.05 |
|
ma581214 |
Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 1/4 Inch Height |
|
$13.99 |
|
fasn58-18jlh |
5/8-18 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends |
|
$1.35 |
|
fasn58-18jrh |
5/8-18 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends |
|
$0.80 |
|
ac430004 |
King Pin Spindle Gusset Kit To Support The Tie Rod Hole When You Drill It For A Heim Or Ford Tie Rod |
|
$25.20 |
Customers who purchased this product, also purchased:
|
Part Number
|
Name
|
Image
|
Price |
|
|
fasn58-18jlh
|
5/8-18 Left Hand Thread Jam Nut For Heim Joints Or Rod Ends
|
|
$1.35 |
|
fasn58-18jrh
|
5/8-18 Right Hand Thread Jam Nut For Heim Joints Or Rod Ends
|
|
$0.80 |
|
ac425124-10a
|
Usa Made Swaged Aluminum Tie Rod 10 Inches Long With 5/8-18 Thread Driver Side On Ball Joint Beam
|
|
$35.75 |
|
ma581238
|
Usa Stainless Steel Misalignment Shim For 5/8 Inch Heim Or Uniball For 1/2 Inch Bolt 3/8 Inch Height
|
|
$17.99 |
|
fkrodendhrsmxl8t
|
Fk Rod Ends 5/8 Left Hand Thread Chromoly Rod End 1/2 Inch Hole Built In Misalignment Shoulder
|
|
$58.99 |
|
fkrodendhrsmx8t
|
Fk Rod Ends 5/8 Right Hand Thread Chromoly Rod End 1/2 Inch Hole Built In Misalignment Shoulder
|
|
$58.99 |
|
ac996120
|
Weldable Optima Battery Box For All Group 34 Blue, Red, Or Yellow Top Optima Batteries
|
|
$34.75 |
|
ac425059r
|
Chromoly Teflon Coated Heim Joint Rod End 5/8 Right Hand Shank With 5/8 Hole
|
|
$36.05 |
|
| |
|
Your shopping cart is empty.
|
|
